For the heaviest of heavy haulage – look no further than our legendary Quad Axle Float Wideners. These units will do the heaviest of workloads. Capable of loading a D9. This is a true workhorse!
FEATURES & BENEFITS
- Standard float gooseneck type construction, Low-Loader classification. These units allow extra payloads compared to standard Tri-Axle units. Main purpose of these units is for carting earthmoving machinery. Ultra heavy-duty Bi-fold ramps are standard.
- Deck widens from 2.5m to 3.5m
- Load up to 36 Tonnes without a load-sharing dolly, but with a dolly load 45-50 Tonnes (check your state regulations to establish the maximum allowable mass limits)
Quad Float Widener Price from $ 129K (+GST)
Quad Float Widener on Airbags Price $ 137K (+GST)
FINANCE AVAILABLE
SPECIFICATIONS
GENERAL
Length
Usable Deck length: 11,040 mm
Width
Closed: 2500mm
Fully Widened: 3500mm
Height
Deck Height: 950mm (on Low-Loader axles)
Capacity (ATM)
60 Tonnes
Tare Weight
14.7 Tonnes
BODY CONSTRUCTION
Side Coaming
8mm Thick Cold-Rolled sheet steel. Tensile Strength = 650mPa
Flooring
8mm Cold-Rolled flat sheet steel – High Tensile 650mPa. Under-Floor construction consists of heavy duty I-Beam cross-members, with industrial C-100 channel under-floor runners for extra support.
Skid-Plate
16mm Thick Oscillating Skid-Plate, with two position bolt-on king pin boss-plates fitted as standard.
Road-Train Bracket
20mm thick folded C-Channel. With extra support gussets. Constructed from 350mPa mild steel.
Rear Tail-Gate
Standard ADR construction: Standard rear bumper bar installed (constructed from 100 x 100 x 6mm RHS)
HYDRAULICS
4 x Deck widening cylinders (50mm wide chrome centre)
Petrol Power-Pack is standard (Diesel upgrade optional). Kohler Brand Supplied.
Unit features Italian made spool valve, all hoses are R4 and R2 type, fittings are generally BSB thread.
UNDERFRAME
Chassis Beams
I-Beam Construction: 25mm thick Flange plates (350mPa), 10mm Webbing plate (450mPa) – Half the chassis webbing is double plated for heavy duty construction.
Landing Gear
JOST A400 Landing Gear (JOST E100 Also used).
King-Pin
JOST 50mm or 90mm available
WE USUALLY FIT WHEELS/BRAKES AND OTHER CUSTOMISED REQUIREMENT UPON RECEIVING FROM ORDER WITH DEPOSIT, ALLOW 2-3 WEEKS FOR READYING FOR PICK UP..
GALLERY
