Quad Float Widener

• Standard float gooseneck type construction, Low-Loader classification. These units allow extra payloads compared to standard Tri-Axle units. Main purpose of these units is for carting earthmoving machinery. Ultra heavy-duty Bi-fold ramps are standard.
• Deck widens from 2.5m to 3.5m
• Load up to 36 Tonnes without a load-sharing dolly, but with a dolly load 45-50 Tonnes (check your state regulations to establish the maximum allowable mass limits)
• Also available in as an extendable model.
• Optional winch fitted
• Optional alloy rims
• Air operated spare wheels cradle
• Toolboxes
• Lift up axles

Length Usable Deck length: 11,040 mm
Width Closed: 2500mm
Fully Widened: 3500mm
Height Deck Height: 950mm (on Low-Loader axles)
ATM: 60 Tonnes
Tare Weight 14.7 Tonnes

Side Coaming 8mm Thick Cold-Rolled sheet steel. Tensile Strength = 650mPa
Flooring 8mm Cold-Rolled flat sheet steel – High Tensile 650mPa. Under-Floor construction consists of heavy duty I-Beam cross-members, with industrial C-100 channel under-floor runners for extra support.
Skid-Plate 16mm Thick Oscillating Skid-Plate, with two position bolt-on king pin boss-plates fitted as standard.

4 x Deck widening cylinders (50mm wide chrome centre)

Petrol Power-Pack is standard (Diesel upgrade optional)

• Heavy duty construction.
• Landing Gear JOST or similar
• King-Pin JOST or similar 50mm or 90mm as required.