Tandem Tag

Features & Benefits

A standard unit will feature all the necessities such as: JOST landing legs, 3-way twist locks, 8mm high-tensile flooring, tie-down points (including Rabbit Ears & Chicken Feet), 8mm thick laser cut side coaming, road-train bracket, LED side markers, ABS/EBS equipped.
2 x Heavy-Duty hydraulic winches on the bottom deck, and an 11,000LBS winch fitted to the upper deck as standard.
Tilting angle of 8 degrees, and this unit can extend the bottom deck length by a further 3,500mm.

SPECIFICATIONS

GENERAL

Length Overall Length: 45FT (13,720mm)
Extended length: 56FT (17,200mm)
Width Exterior: 2500mm
Height Bottom Deck: 999mm
Capacity (ATM) ATM: 45 Tonnes
Tare Weight 14 Tonne

BODY CONSTRUCTION

Side Coaming 8mm Thick Cold-Rolled sheet steel. Tensile Strength = 650mPa
Flooring 8mm Cold-Rolled flat sheet steel – High Tensile 650mPa. Under-Floor construction consists of heavy duty I-Beam cross-members, with 30 x 30 x 3mm under-floor runners for extra support. Sliding beams constructed from 8mm high tensile sheet – Hot rolled into C-Channel
Skid-Plate 12mm Thick Skid-Plate, with two position bolt-on king pin boss-plates fitted as standard.
Road-Train Bracket These units do not feature a Road-Train bracket.
Rear Tail-Gate Standard ADR construction: Standard rear bumper bar installed (constructed from 100 x 100 x 6mm RHS)

HYDRAULICS

2 x lifting cylinders (100mm wide chrome centre)

1 x Sliding cylinder (125mm wide chrome centre, 6000mm stroke)

PTO Hydraulic setup, with Power-Pack optional. Unit features Italian made spool
valve, all hoses are R4 and R2 type, fittings are generally BSB thread.

UNDERFRAME

Chassis Beams
I-Beam Construction: 20mm thick Flange plates (350mPa), 8mm Webbing plate (450mPa) – Half the chassis webbing is double plated for heavy duty construction.

Landing Gear
JOST A400 Landing Gear (JOST E100 Also used).

King-Pin
JOST 50mm or 90mm available.